Skip to content
The slag pot is an important equipment in steelmaking production. It is a container used to contain high-temperature slag produced during the steel smelting process. It has a bowl-shaped container with lifting trunnions on both sides. It is also one of the auxiliary equipment in the steel making plant Used for steelmaking, containing steel slag, waste, etc. when slag is discharged from ironmaking. The traditional material is cast iron. In recent years, ductile iron has been widely used.
When used, it directly contacts steel slag to withstand high temperature baking, steel slag temperature, and steel leakage to accept molten steel under abnormal circumstances. Under normal circumstances, the load-bearing capacity is its own weight and slag weight. The load increases sharply when steel breaks out. Once the can is stuck, it needs to be hit with a heavy hammer to cause cracks. Because the slag tank is mostly used under severe alternating hot and cold conditions, the environment is harsh, the heating is variable, the number of uses, and the volume of the slag tank increase the difficulty of casting, so the quality requirements for it are relatively high.
The production process flow of slag pot:
1. During production, large-scale casting processing manufacturers will repeatedly review and design their processes based on their working principles, and then distribute them to casting workshops. Finally, the workshops will formulate the production process flow according to the required process flow.
2. When making wooden molds, it is required to have reasonable structure, durability, smooth surface, draft angle, etc. according to the requirements of large steel castings - slag tanks.
3. The workshop starts with modeling, prepares a suitable sand box, arranges the modeling parts in strict accordance with the process drawings and process operating procedures, and performs sand impact, demoulding, molding and core making, etc.; finally, check whether the sand mold has cracks or damage. Close the boxes in strictaccordance with the operating procedures.
4.Large-scale casting processing manufacturers will conduct various repeated testing and testing of the raw materials for smelting before use; and require material weight blocks to proportion the raw materials, take samples for spectral analysis, and pour after the results are qualified; finally pour, and operate according to the process Procedures and processes require pouring.
5. Carry out finishing and finished product testing. Cut off excess risers, etc., polish the surface of the slag tank to make it smooth, and finally inspect the size and weight of the finished product.
